Select Page
BMW E46 3-Series E39 5-Series Z3 M52TU M54 2.5L 3.0L Cylinder Head 793 OEM

BMW E46 3-Series E39 5-Series Z3 M52TU M54 2.5L 3.0L Cylinder Head 793 OEM

£421.85

3 Series E46
2000 – 2000 323Ci Coupe (E46/M52)
2000 – 2000 323Ci Convertible (E46/M52)
2000 – 2000 323i Touring (E46/M52)
1999 – 2000 323i Sedan (E46/M52)
2001 – 2006 325Ci Coupe (E46/M54)
2001 – 2006 325Ci Convertible (E46/M54)
2003 – 2006 325Ci SULEV Coupe (E46/M56)
2001 – 2005 325i Touring (E46/M54)
2001 – 2005 325i Sedan (E46/M54)
2003 – 2005 325i SULEV Touring (E46/M56)
2003 – 2005 325i SULEV Sedan (E46/M56)
2001 – 2005 325xi Touring (E46/M54)
2001 – 2005 325xi Sedan (E46/M54)
2000 – 2000 328Ci Coupe (E46/M52)
1999 – 2000 328i Sedan (E46/M52)
2001 – 2006 330Ci Coupe (E46/M54)
2001 – 2006 330Ci Convertible (E46/M54)
2001 – 2005 330i Sedan (E46/M54)
2001 – 2005 330xi Sedan (E46/M54)

5 Series E39
2001 – 2003 525i Touring (E39/M54)
2001 – 2003 525i Sedan (E39/M54)
From 09/98 – 2000 528i Touring (E39/M52)
From 09/98 – 2000 528i Sedan (E39/M52)
2001 – 2003 530i Sedan (E39/M54)

5 Series E60
2004 – 2005 525i Sedan (E60/M54)
2004 – 2005 530i Sedan (E60/M54)

X3 E83
2004 – 2006 X3 2.5i SAV (E83/M54)
2004 – 2006 X3 3.0i SAV (E83/M54)

X5 E53
2001 – 2006 X5 3.0i SAV (E53/M54)

Z4 E85
2003 – 2005 Z4 2.5i Roadster (E85/M54)
2003 – 2005 Z4 3.0i Roadster (E85/M54)

Z3
1999 – 2000 Z3 2.3 Roadster (Z3/M52)
2001 – 2002 Z3 2.5i Roadster (Z3/M54)
From 09/98 – 2000 Z3 2.8 Roadster (Z3/M52)
From 09/98 – 2000 Z3 2.8 Coupe (Z3/M52)
2001 – 2002 Z3 3.0i Roadster (Z3/M54)
2001 – 2002 Z3 3.0i Coupe (Z3/M54)

Category:

Description

ITEM: cylinder head, unk

DESCRIPTION:
This cylinder head was taken from a 2001 325i Touring with unknown mileage. Cast part number: 1436793. The camshafts and bearing ledges are not included, but the valves are included as shown. The block-to-head mating surface has been checked and has no measurable warp or visible cracks. The valve faces have some minor carbon staining but no serious damage. The cooling passages are clean and free from oxidation and scaling. The housing exterior has no rubbing damage or cracks, and all mounting points are intact. Several of the exhaust manifold studs are missing and must be replaced before installation. Details can be viewed in the photos. Guaranteed good working condition. This is a used original BMW part.

The pictures are photos of the actual part you will receive

Related products